Do it yourself
Frequently asked questions about cars and motorcycles

How to Change Oil and Filter on a Ford Kuga

Model: Ford Kuga MK 2, C520 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Engine oil

See other generations:
Video tutorial

Want to change the oil and filter on a Ford Kuga? Follow these steps: lift the bonnet and secure it (unscrew the top-up cap), then lift the car on a column lift or jack; unscrew the bolt of the oil sump: let the fluid drain into a disposal container and re-screw the bolt of the oil sump.

Using a strap wrench, unscrew the oil filter and remove it (fit the new part).

Finally, top up with the new fluid, measuring the oil level multiple times with the metal dipstick until the ideal measurement is reached.


Updated on 8 March 2026 by ScegliAuto


Related tutorials

Ford Kuga (2012-2019 / MK 2, C520) In this video tutorial, we will see how to remove the oil filter on a second-generation Ford Kuga. The oil filter is located under the vehicle: so li…
Ford Kuga (2012-2019 / MK 2, C520) Replacing the worn oil filter on a Ford Kuga? Here's how to remove it. Open the car door and pull up the engine compartment release lever located at …
Ford Kuga (2012-2019 / MK 2, C520) In this video, learn how to change the oil and oil filter as part of the regular maintenance service on a Ford Kuga MK2. First, lift the vehicle at t…

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos