Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Oil Filter on Ford Kuga

Model: Ford Kuga C520, MK 2 - Years 2012-2019
Part: Oil filter

In this video tutorial, we will see how to remove the oil filter on a second-generation Ford Kuga. The oil filter is located under the vehicle: so lift it up and get the appropriate filter extractor; unscrew and remove it, as shown in the video. Naturally, when changing the oil filter, it is necessary to change the engine oil as well by unscrewing the drain plug and letting it flow out. Refit the new filter with the gasket, screwing it in by hand first, then tightening with the appropriate tool; after that, pour the new oil of the correct type into the designated reservoir.

Updated on 30 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Oil Filter Replacement on Ford Kuga
Oil Filter Replacement on Ford Kuga
Ford Kuga (2012-2019 / C520, MK 2) Replacing the worn oil filter on a Ford Kuga? Here's how to remove it. Open the car door and pull up the engine compartment release lever located at …
Engine Oil and Oil Filter Replacement on Ford Kuga 2018 MK2
Engine Oil and Oil Filter Replacement on Ford Kuga 2018 MK2
Ford Kuga (2012-2019 / C520, MK 2) In this video, learn how to change the oil and oil filter as part of the regular maintenance service on a Ford Kuga MK2. First, lift the vehicle at t…
Where is the oil filter located on the Ford Kuga?
Where is the oil filter located on the Ford Kuga?
Ford Kuga (2008-2012 / C394, MK 1) In this video, you can see where the oil filter is located on the Ford Kuga and how to proceed if you need to replace it. This operation also include…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos