Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Oil Change for a Ford Kuga

Model: Ford Kuga C520, MK 2 - Years 2012-2019
Part: Engine oil

Do you want to replace the engine oil and filter on a Ford Kuga? Here's how to carry out the replacement. Open the car's door and pull up the engine cover release lever located at the bottom left of the dashboard, then lift the front bonnet. Raise the car with a jack and remove the securing screws from the engine cover panel, then unscrew the large securing bolt of the container cap (let the fluid drain into a container). Once the oil has drained, unscrew the worn filter and fit a new one. Top up the engine with the new oil and close the front bonnet after maintenance.

Updated on 7 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil on a Ford Kuga
How to Change the Engine Oil on a Ford Kuga
Ford Kuga (2012-2019 / C520, MK 2) To change the engine oil on a Ford Kuga, access the underside of the car to unscrew the bolts securing the undertray. Once the undertray is removed, …
What does the "Change engine oil as soon as possible" message on the Ford Kuga indicate?
What does the "Change engine oil as soon as possible" message on the Ford Kuga indicate?
Ford Kuga (2012-2019 / C520, MK 2) When the message "Change engine oil as soon as possible" appears on the dashboard of the Ford Kuga, it means that the engine oil has degraded and nee…
Replacing the Oil Filter on Ford Kuga
Replacing the Oil Filter on Ford Kuga
Ford Kuga (2012-2019 / C520, MK 2) In this video tutorial, we will see how to remove the oil filter on a second-generation Ford Kuga. The oil filter is located under the vehicle: so li…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos