Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil and Oil Filter Replacement on Ford Kuga 2018 MK2

Model: Ford Kuga MK 2, C520 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Engine oil

See other generations:
Video tutorial

In this video, learn how to change the oil and oil filter as part of the regular maintenance service on a Ford Kuga MK2. First, lift the vehicle at the front and remove the lower engine cover by unscrewing the fastening screws; then, unscrew the engine oil drain bolt and let it drain into a container for at least ten minutes.

Next, remove the oil filter and replace it with the new one, as shown in the video; finally, add the new engine oil and fill to the correct level!


Updated on 9 April 2026 by ScegliAuto


Related tutorials

Oil Filter Replacement on Ford Kuga
Oil Filter Replacement on Ford Kuga
Ford Kuga (2012-2019 / MK 2, C520) Replacing the worn oil filter on a Ford Kuga? Here's how to remove it. Open the car door and pull up the engine compartment release lever located at …
Oil change reset on a Ford Kuga 2
Oil change reset on a Ford Kuga 2
Ford Kuga (2012-2019 / MK 2, C520) In this very useful video tutorial today, we will see how to reset the oil change indicator light on a Ford Kuga, second-generation model produced fr…
How do you replace the oil filter in the Ford Kuga 2?
How do you replace the oil filter in the Ford Kuga 2?
Ford Kuga (2012-2019 / MK 2, C520) Let's see how with a specially made key that can be easily purchased, you can change the engine oil filter in a Ford Kuga 2. Clearly, we will also re…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos