Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light on a Ford Fiesta MK7

Model: Ford Fiesta MK 7, MK VII, Fiesta 7 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Tail light

See other generations:
Video tutorial

In this video, we see how to remove the rear light from a Fiesta hatchback (the one commonly found in Europe) and a Fiesta sedan, which we have never seen in Europe as it is a model intended for Asian and South American markets. Let's start with this: Open the boot, remove the internal trim panel to access the back of the light.

Unscrew the nuts or bolts (usually three), detach the light, and pull it outwards. Disconnect the electrical connector, replace the faulty bulb.

Reassemble in reverse order. For the hatchback version, open the rear hatch, remove the plastic cover inside the light (often clipped or with a screw).

Disconnect the electrical connector, rotate the bulb holder counterclockwise and pull it out, then replace the bulb. Finally, reassemble the bulb holder and the cover.


Posted on 12 June 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on the Ford Fiesta Mk7
How to Reset the Service Light on the Ford Fiesta Mk7
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) If you intend to manually reset the service light on your Ford Fiesta Mk7, simply follow this guide and put it into practice. First, get into the car…
How to remove the rear light of a Ford Fiesta MK7
How to remove the rear light of a Ford Fiesta MK7
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) To remove the rear light assembly from the Ford Fiesta MK7, start by opening the boot, looking at the inside of the light, where you will see a plast…
How to replace the rear light of the Ford Fiesta MK7
How to replace the rear light of the Ford Fiesta MK7
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) Today we will explain how to replace the license plate light of the Ford Fiesta model MK7. To replace the license plate light, we need to use a small…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos