Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear light of a Ford Fiesta MK7

Model: Ford Fiesta MK 7, MK VII, Fiesta 7 - Years 2017-2023
Part: Tail light

To remove the rear light assembly from the Ford Fiesta MK7, start by opening the boot, looking at the inside of the light, where you will see a plastic cover panel: look for the fixing screw that holds the light (usually a Torx T25) located just behind the light, on the inside of the boot area; unscrew it. At this point, the light is only held by two clips on the bodywork, so from the outside, pull it towards you. You will hear two clips disengaging from the bodywork with a click. At the back, you will find the electrical connector: disconnect it to extract the light assembly. For the 3-door Fiesta, the screw is hidden under a small rubber cap, then the procedure is identical.

Posted on 27 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Light of a Ford Fiesta
How to Remove the Rear Light of a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Learn how to remove the rear light of a Ford Fiesta. In this video, see how to dismantle the reflector light. Open the compartment under the light, s…
How to Remove the Front Headlamp of the Ford Fiesta?
How to Remove the Front Headlamp of the Ford Fiesta?
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) In this video, see how to remove the front headlamp of the Ford Fiesta MK7, a very simple task. First, remove the plastic cap indicated using a screw…
How to Replace the Rear Light on a Ford Fiesta MK7
How to Replace the Rear Light on a Ford Fiesta MK7
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) In this video, we see how to remove the rear light from a Fiesta hatchback (the one commonly found in Europe) and a Fiesta sedan, which we have never…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos