Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Fog Light of a Ford Focus

Model: Ford Focus MK 2, Focus 2 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Fog lights

See other generations:
Video tutorial

Let's see how to remove the fog light along with its bulb from a Ford Focus. Prepare to remove the side fog light located in the bumper.

Use the appropriate screwdriver to unscrew the securing screws located inside the fog light's plastic housing, then use a lever to remove it from the bumper. Once the plastic is removed, unscrew the side screws of the fog light and pull it out from the car's bumper (disconnect the power cable).

Install the new unit along with the new bulb (same size and voltage). Test its proper functioning after installation.


Updated on 11 March 2026 by ScegliAuto


Related tutorials

How to Install Front Fog Lights on the Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) These brief and simple instructions will show you how to install the front fog lights on the Ford Focus. First, move to the front and start by removi…
How to disassemble the rear fog light in the Ford Focus RS?
How to disassemble the rear fog light in the Ford Focus RS?
Ford Focus (2011-2018 / MK 3) In this tutorial we can see how to disassemble the rear fog light in the Ford Focus RS, a very simple and quick operation. First of all, we lift the …
How to Remove Fog Lights
How to Remove Fog Lights
Ford Focus (1998-2004 / MK 1) In this case, one fog light is broken and needs replacing, while the other is damaged. First, disconnect the visible clip inside the lower grille. Ne…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos