Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installing AUX IN Adapter for iPod

Model: Ford Focus MK 1 - Years 1998-2004
Part: Car stereo

You can purchase an aftermarket converter to connect to the original car radio that provides an AUX output for iPod, iPhone, or iPad. The installation is very simple, but you will need the appropriate keys to release the original car radio. Insert the keys into the designated holes on the sides of the radio, press until the retaining springs are released, and pull out the radio. Then position the converter directly under the radio, securing it with double-sided tape, and make the electrical connections as per the attached diagram. Finally, run the cable with the jack to the back and route the jack out from under the centre console. Reattach the car radio.

Updated on 4 February 2026 by ScegliAuto

Video tutorial

Related tutorials

iPhone iPod Charging Mount
iPhone iPod Charging Mount
Ford Focus (1998-2004 / MK 1) You can purchase an aftermarket mount for charging the iPhone to fit in the glove compartment on the centre console, to the left of the radio. Instal…
Installing Aux and Bluetooth Adapter Accessory Kit
Installing Aux and Bluetooth Adapter Accessory Kit
Ford Focus (1998-2004 / MK 1) To proceed with the installation of the Bluetooth kit, it is first necessary to remove the original car radio and have the appropriate keys to releas…
Installation of FM Modulator and Input Adapter
Installation of FM Modulator and Input Adapter
Ford Focus (1998-2004 / MK 1) To remove the radio from the console, insert the appropriate tools into the side slots of the radio to release the retaining springs. At this point, …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos