Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : Aux and Bluetooth adapter accessory kit installation

Ford Focus - Video tutorial

Model: Ford Focus MK 1 - Years 1998-2004
Part: Accessory Kit
Operation: Aux and Bluetooth adapter accessory kit installation

In order to proceed with the installation of the bluetooth kit it is first of all necessary to disassemble the original car radio and then have the appropriate keys to release it. Once unhooked, remove the car radio from its seat and make the electrical connections of the kit as per the attached diagram, paying attention to properly insulate all the joints using faston covering caps rather than just insulating tape. Once the connections have been completed, place the Aux outputs in place of the cigar lighter and the bluetooth receiver on the dashboard, immediately above the air vent, through which the cable is to pass.


Posted on 7 July 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos