Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Glove Compartment in a Ford Focus

Model: Ford Focus MK 3 - Years 2011-2018
Part: Accessory kit

This operation requires minimal effort and only a few minutes. Position yourself in the front passenger seat and remove the panel next to the glove compartment by simply applying a lever in the gap present. Now unscrew the screws located at the back of this panel you just removed. Remove the other two screws found on the upper edge of the glove compartment. This way, you can extract the first part of the glove compartment. Finally, unscrew the additional screws inside to release the clips holding the compartment in place for complete removal.

Updated on 27 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Glove Compartment on a Ford Focus
How to Replace the Glove Compartment on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) To carry out this simple operation, you will need a tool that allows you to lever without visibly damaging the trim around the glove compartment. You…
Removing the Glove Box on a Ford Focus
Removing the Glove Box on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Want to remove the glove box in your car's dashboard? Here’s how to disassemble the glove box on a Ford Focus. Open the glove compartment and locate …
Removing Heating Fan from Ford Focus
Removing Heating Fan from Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) In this video tutorial, you will learn how to remove the heating cabin fan from a Ford Focus. First, remove the glove compartment: unclip the levers …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos