Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installation of FM Modulator and Input Adapter

Model: Ford Focus MK 1 - Years 1998-2004
Part: Accessory kit

To remove the radio from the console, insert the appropriate tools into the side slots of the radio to release the retaining springs. At this point, pull the radio out of the compartment, carefully disconnecting the connectors and taking care not to damage the wires. This FM modulator is an auxiliary input adapter that connects to the radio via the antenna line and allows you to listen to any portable music player with a 3.5 mm jack. This is the most convenient way to add a new audio source to the radio without losing sound quality and is superior to wireless FM modulators. A 3.5 mm connector complementary to the RCA cable is included to allow music playback from an iPod, smartphone, Zune, MP3 player, or any other portable audio device with a 3.5 mm headphone jack.

Updated on 6 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Stereo from a Ford Focus
Removing the Stereo from a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Use original or aftermarket metal keys to remove the stereo from the Focus. Remove the buttons at the bottom of the stereo (as shown in the video), i…
How to Remove the Original Radio from a Ford Focus
How to Remove the Original Radio from a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) How do you remove the original radio from a Ford Focus? Carefully follow this video to perform the removal: use the original or aftermarket metal key…
How to Remove the Stereo on Ford Focus
How to Remove the Stereo on Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) How can you replace the original radio on a Ford Focus? Follow this video closely to perform the disassembly. Use the original or aftermarket metal k…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos