Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Light on a 2018 Ford Fiesta

Model: Ford Fiesta MK 7, MK VII, Fiesta 7 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Tail light

See other generations:
Video tutorial

Removing the rear light on a Ford Fiesta is a fairly simple task that can be done without special tools. First, detach the carpet section located at the back of the light inside the boot; simply slightly widen the boot seal and pull the carpet off by hand.

Behind the carpet, you will notice a butterfly nut that secures the light to the bodywork, and it will be sufficient to unscrew it by hand to extract the light. After unscrewing the butterfly nut, the light will come off easily, and you just need to disconnect the power connectors to remove it completely from the car. Once removed, you can replace any bulbs or the entire light if necessary, and then proceed to reassemble everything in the reverse order of disassembly.


Updated on 13 March 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Light of a Ford Fiesta
How to Remove the Rear Light of a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) Learn how to remove the rear light of a Ford Fiesta. In this video, see how to dismantle the reflector light. Open the compartment under the light, s…
How to Remove and Replace the Rear Light on a Ford Fiesta
How to Remove and Replace the Rear Light on a Ford Fiesta
Ford Fiesta (2002-2008 / MK V, MK 5, Fiesta 5) In this guide, learn how to remove and replace the rear light on a Ford Fiesta: open the boot lid, and using a screwdriver, unscrew (with a socket or…
Removing the Rear Light on a Ford Fiesta
Removing the Rear Light on a Ford Fiesta
Ford Fiesta (2002-2008 / MK V, MK 5, Fiesta 5) Let's see how to remove the rear light on a Ford Fiesta. Lift the tailgate to access the securing screws located at the sides of the light. Unscrew t…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos