Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Diesel Filter on a Ford Fiesta 1.5 tdCi

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Diesel fuel filter

Replacing the diesel filter is one of the most effective and beneficial maintenance tasks for your vehicle. You only need a minimum of experience and skill to carry out this job. Park the car where it won’t obstruct anyone and engage the handbrake. Open the bonnet and disconnect the connectors on the filter. Remove its cover after loosening the clamp on the air inlet. Remove the diesel filter cover and its electrical clips. Then, remove the second cover and the fuel pipes, taking care to avoid spills. When refitting the new part, replace the rubber seal on the cover. Reassemble everything in reverse order.

Updated on 14 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the fuel filter of the Ford Fiesta 1.4 TDCi
How to replace the fuel filter of the Ford Fiesta 1.4 TDCi
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) The following steps will show us the process of disassembling and replacing the diesel filter of the Ford Fiesta 1.4 TDCi. First, we lift the vehicle…
How to Replace the Diesel Filter on a Ford Fiesta MK6 1.5 TDCi
How to Replace the Diesel Filter on a Ford Fiesta MK6 1.5 TDCi
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Today, follow these step-by-step instructions to remove and replace the diesel filter on a sixth-generation Ford Fiesta with a 1.5 TDCi engine. First…
How to Remove Injectors on Ford Fiesta MK6 1.6 TDCI
How to Remove Injectors on Ford Fiesta MK6 1.6 TDCI
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) In this video tutorial, you will learn how to remove and replace the diesel injectors on the sixth series Ford Fiesta with a 1.6 TDCI engine. First, …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos