Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : Remove the wiper motor on Ford Focus

Ford Focus - Video tutorial

Model: Ford Focus MK 3 - Years 2011-2018
Part: Windscreen wipers
Operation: Remove the wiper motor on Ford Focus

We pull the plastic lever located at the bottom left of the dashboard, lift the bonnet and put it in safety. We remove the grille placed under the windshield, then, with a socket wrench, we disassemble the arms of the wiper blades. We remove the plastic covering with special locking screws, disconnect the battery terminals and remove the wiper motor (we unscrew the pins). We replace the piece we disassembled with a new original one. Let's reassemble everything by proceeding backwards. We test the functioning of the assembled piece by operating the levers.


Posted on 28 November 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Focus 2004-2011 - Where is the Ford Focus windshield washer pump fuse located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos