Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : As a replacement right exterior mirror on Ford Focus

Ford Focus - Video tutorial

Model: Ford Focus MK 1 - Years 1998-2004
Part: Outside rearview mirror
Operation: As a replacement right exterior mirror on Ford Focus

Let's see how to change the broken right mirror on our Ford Focus. With a lever we remove the part of the inner lining of the mirror (there are plastic clips). Once the piece of cover has been removed, we are going to unscrew the fixing screws of the mirror. We remove the mirror with the maneuvering cables (electrical clamps) of the glass from the car door. We mount the mirror with the screws, the adjustment cables and the plastic cover in the door sheet. Finally, we test the correct functioning of the mirror. We use the operation buttons.


Posted on 29 November 2023 by ScegliAuto

    Frequently Asked Questions

    • Focus 1998-2004 - How much does the Ford Focus 2002 right rearview mirror cost? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos