Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Light on a Ford Ka

Model: Ford Ka MK 2 - Years 2008-2016
Part: Tail light

Replace the damaged rear light on a Ford Ka. Open the boot lid, and using a screwdriver, remove the screws located at the side of the light (depending on the light being removed). Disconnect the rear light from its housing once all screws are removed (disconnect the power connectors). Replace any damaged bulbs with new ones (same size and voltage). Refit the new light with the associated screws and reconnect the power connectors. Test the proper functioning of the bulbs installed inside the light.

Updated on 16 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Light Bulb on the Ford Ka?
Ford Ka (2008-2016 / MK 2) To replace the rear light bulb on the Ford Ka, open the tailgate of the boot to access the screws next to the light. By removing these screws, you ca…
How to replace the rear light bulb on a Ford Ka?
How to replace the rear light bulb on a Ford Ka?
Ford Ka (2008-2016 / MK 2) To replace the rear light bulb on a Ford Ka, lift the tailgate to access the screws located next to the light unit. Once these have been loosened, yo…
How to Replace the Rear Headlamp Bulb on the Ford Ka?
How to Replace the Rear Headlamp Bulb on the Ford Ka?
Ford Ka (2008-2016 / MK 2) To replace the rear headlamp bulb on the Ford Ka, open the boot lid to access the screws next to the light unit that secure it in place. Once these s…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos