Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : Removing the mirror on Ford Focus

Ford Focus - Video tutorial

Model: Ford Focus MK 3 - Years 2011-2018
Part: Outside rearview mirror
Operation: Removing the mirror on Ford Focus

Is the mirror mounted on the Ford Focus damaged? Let's see how the sheet metal of the car is removed from above. We peel off the plastic covering to access the screws. Remove the screw caps with a lever and unscrew the tightening screws with a special socket wrench or other suitable tool. Once the locking pins have been removed, we remove the mirror, disconnect the terminals of the electric cables operating the mirror. We mount the mirror with screws, connect the clamps of the adjustment cables and plastic caps covering the screws. We adjust the mirror of the mirror at the end of the assembly.


Posted on 4 December 2023 by ScegliAuto

    Frequently Asked Questions

    • Focus 1998-2004 - How much does the Ford Focus 2002 right rearview mirror cost? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos