Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : Headlight bulb replacement

Ford Focus - Video tutorial

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Headlight bulb
Operation: Headlight bulb replacement

Open the front hood and make sure it is supported safely. In order to replace the headlight bulb it is necessary to remove the headlight itself by unscrewing the relative fixing screws, pull it forward, remove the protective cap of the bulb holder and extract the latter from its seat; then remove the old bulb and insert the new one; re-attach the bulb holder to the headlight, then the cap, reposition the headlight in its seat and tighten the relative fixing screws. It is advisable to check the operation of the new light bulb before reassembling everything.


Posted on 4 July 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Focus 1998-2004 - How to replace the headlight bulb on a Ford Focus? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos