Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Cabin Fan from a Ford Fiesta

Model: Ford Fiesta Fiesta 5, MK 5, MK V - Years 2002-2008
Part: Blower motor

In this video, you will see the entire air heating assembly of your vehicle's cabin, helping you locate the fan in its housing. This is positioned under the dashboard, in the central part, near the centre console. On the left side, you will find the connector that you must disconnect, and the five screws, as shown in the video, that secure the fan to the air duct. Once removed, you can take off the fan cover and extract the fan by sliding it out from the side of the cover and slightly rotating it.

Updated on 19 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Cabin Fan on a Fiesta
Removing the Cabin Fan on a Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Removing the ventilation fan from the Fiesta. Here’s how to do it from inside the vehicle. The cabin ventilation fan is located in the dashboard on t…
How to Remove the Cabin Fan Resistor on Ford Fiesta 1.4
How to Remove the Cabin Fan Resistor on Ford Fiesta 1.4
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Is the cabin ventilation fan not working? Let's see how to remove the fan resistor on a Ford Fiesta. Open the car door and unlock the front bonnet. L…
How to replace the cabin fan resistor of the Ford Fiesta
How to replace the cabin fan resistor of the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) The following steps will show us how to disassemble and replace the resistor of the cabin fan of the Ford Fiesta. First, we enter the cabin and start…

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos