Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Cabin Fan on Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Blower motor

How do you access and remove the cabin fan on a Ford Fiesta? Here’s how. First, you should know that the fan is located next to the pedal area, on the side facing the central tunnel. Therefore, the first part of the job will be a bit laborious, as you will need to remove the brake pedal (it has four bolts securing the bracket, as shown in the video, and two that secure the pedal lever) and the accelerator pedal. Then, remove the panel facing the central tunnel and you will finally find the fan. It is secured by three T20 Torx screws that you will need to unscrew, open the compartment, and disconnect the wires.

Updated on 11 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the cabin fan in the Ford Fiesta?
How to replace the cabin fan in the Ford Fiesta?
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) To replace the cabin fan in the Ford Fiesta, open the glove compartment and remove the pins inside so that it can be completely removed. You can then…
How to Replace the Cabin Fan on a Ford Fiesta?
How to Replace the Cabin Fan on a Ford Fiesta?
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) To replace the cabin fan on a Ford Fiesta, open the glove compartment and detach the pins inside so it can be completely removed. Next, proceed to de…
How to Remove the Cabin Fan Resistor on Ford Fiesta 1.4
How to Remove the Cabin Fan Resistor on Ford Fiesta 1.4
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Is the cabin ventilation fan not working? Let's see how to remove the fan resistor on a Ford Fiesta. Open the car door and unlock the front bonnet. L…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos