Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Air Filter on a Ford Ka

Model: Ford Ka MK 2 - Years 2008-2016
Part: Cabin air filter

Position the car, in this case, a Ford Ka, on a flat surface or on a ramp to work safely. Now, as can be seen in the maintenance manual, locate the position of the pollen filter housing, which is situated inside the cabin, under the glove compartment on the passenger side. At this point, undo the two screws securing the cover over the filter using the appropriate spanner. Remove the cover and extract the old filter from its housing to replace it with a new one (taking care to insert it in the correct orientation). Reassemble everything, and you're done!

Updated on 21 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Filter on a Ford Ka
How to Replace the Cabin Filter on a Ford Ka
Ford Ka (2008-2016 / MK 2) Hello everyone, in this short video, I will show you how to replace the cabin filter on your Ford Ka. First, locate the exact position of the filter,…
Replacing the Cabin Air Filter
Replacing the Cabin Air Filter
Ford Ka (1996-2008 / MK 1) The cabin air filter is located just behind the centre tunnel, and to replace it, you do not need to disassemble anything. Access it from the passeng…
Replacement of Cabin Air Filter
Replacement of Cabin Air Filter
Ford Ka (1996-2008 / MK 1) In the car model in question, the cabin air filter is located in the engine bay, just below the windscreen on the passenger side; to replace it, open…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos