Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Dashboard and Car Radio

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Car stereo

Using a plastic tool to avoid damaging the bodywork, pry at the sides of the dashboard cover to release the plastic clips and remove it. Still using a plastic tool, pry at the sides of the console panel and then remove it to access the screws holding the radio. Unscrew the radio mounting screws to completely slide the radio out of its housing. Carefully remove the radio by lifting it to allow disconnection of the connectors at the back. Install the new radio by reversing these steps.

Updated on 5 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Dashboard and Stereo Removal
Dashboard and Stereo Removal
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Using a plastic tool to avoid damaging the bodywork, lever at the sides of the dashboard cover to release the plastic clips and remove it. Still usin…
Replacing the Radio in a Ford Fiesta
Replacing the Radio in a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Replace the radio in a Ford Fiesta. Start by removing the trim around the instrument panel with a plastic lever (these are the air vents) and detach …
How to recover the unlock code for the Ford Fiesta car radio
How to recover the unlock code for the Ford Fiesta car radio
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Today we will see how to recover the unlock code of the Ford Fiesta car radio after replacing, updating or disconnecting the battery. The car radio u…

Other guides you may be interested in

    Frequently Asked Questions

    • Fiesta 2008-2017 - What to do when the Ford Fiesta radio doesn't work? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos