Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Spare Wheel on a Fiesta

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Wheel

Removing the wheel from a Ford Fiesta. Let's see how to remove the damaged wheel from the car. Lift the tailgate and take the wheel removal kit. Position the jack under the jacking point of the car (under the stiffest part of the chassis), lift the car slightly, and loosen the wheel nuts. Raise the car with the jack lever, unscrew the nuts, and pull the wheel off the hub. Fit the space saver or spare wheel onto the hub with the respective nuts. Always remember to store the removal kit with all its parts in the boot after maintenance. Lower the car to the ground after fitting.

Updated on 28 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove and replace the wheel with the spare one on the Ford Fiesta
How to remove and replace the wheel with the spare one on the Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) In this video tutorial we will see the instructions that will allow us to locate the spare wheel and replace it on the Ford Fiesta. First, we open th…
How to Replace the Rear Wheel on a Ford Fiesta?
How to Replace the Rear Wheel on a Ford Fiesta?
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) To replace the rear wheel, insert the jack under the chassis near the wheel and turn its handle to lift the car: once it is lifted, loosen the bolts …
How to Release the Spare Wheel on a Ford Fiesta?
How to Release the Spare Wheel on a Ford Fiesta?
Ford Fiesta (1996-2002 / Fiesta 4, Be91, MK 4, MK IV) In this tutorial, see how to remove the spare wheel on the Ford Fiesta MK4, a very simple operation. It is located under the vehicle, at the rear, in…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos