Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. C Max
    4. : Ford C-max diesel filter replacement

Ford C Max - Video tutorial

Model: Ford C Max MK 2 - Years 2010-2019
Part: Diesel filter
Operation: Ford C-max diesel filter replacement

In this video we will see how to remove the diesel filter of a Ford C-max; it will also be shown how to carry out the routine maintenance coupon. To replace the diesel filter we go to open the engine hood and we go to disconnect the electrical connector of our filter, pressing on the tab: then we remove the filter screws with a socket wrench and extract it from the car. At this point, let's replace it with the new one, of the right type (we recommend the original spare part for this type of components) and reassemble it in its seat, making sure to insert the gasket correctly!


Posted on 28 December 2023 by ScegliAuto

    Frequently Asked Questions

    • C Max 2003-2010 - How much does the Ford C-Max diesel filter cost? Read Answer
    • C Max 2010-2019 - Where is the Ford C-max diesel filter located? Read Answer
    • C Max 2003-2010 - How much does the Ford C max diesel filter cost? Read Answer
    • C Max 2003-2010 - How many km do you replace the diesel filter on the Ford Cmax? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos