Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the cabin filter of the Ford C-Max?

Model: Ford C Max MK 2 - Years 2010-2019
Part: Cabin air filter

In order to replace the cabin filter of the Ford C-Max, you need to completely remove the panel located on the left side of the front passenger footwell: here you will need to identify the underlying components and open the filter box by removing the corresponding cover. The cabin filter below can then be removed and replaced with a new spare part; after the replacement, you can insert the new one, making sure that everything works correctly even after the replacement.

Posted on 18 May 2024 by ScegliAuto

Video tutorial

Related tutorials

Replace the Cabin Filter on a Ford C-Max
Replace the Cabin Filter on a Ford C-Max
Ford C Max (2003-2010 / MK 1) Replace the cabin air filter on the Ford C-Max? Let's look at the removal from inside the vehicle. Locate the filter housing situated in the centre c…
Where is the cabin filter located in the Ford C-Max?
Where is the cabin filter located in the Ford C-Max?
Ford C Max (2003-2010 / MK 1) In this video, you can see where the cabin filter is located in the Ford C-Max and how to proceed if you need to replace it, a very simple and quick …
How to Reset the Tyre Pressure Light on the Ford C-Max
How to Reset the Tyre Pressure Light on the Ford C-Max
Ford C Max (2010-2019 / MK 2) In this video, dedicated to the Ford MPV, the C-Max, you will see how to respond when the message "check tyre pressure" appears on the car's onboard …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos