Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Cabin Filter on a Ford C-Max

Model: Ford C Max MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Cabin air filter

See other generations:
Video tutorial

Replace the cabin air filter on the Ford C-Max? Let's look at the removal from inside the vehicle. Locate the filter housing situated in the centre console (near the pedals).

Remove the cap from the black plastic filter housing (release the black plastic by pulling it), then extract the worn cabin filter. Insert a new cabin filter into its housing correctly.

It should fit snugly around the walls of the box. Reattach the cap of the filter box and tighten the cover. Check the correct fitting of the cover to avoid unpleasant detachments while driving.


Updated on 22 March 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Filter on the Ford C-Max?
How to Replace the Cabin Filter on the Ford C-Max?
Ford C Max (2010-2019 / MK 2) To replace the cabin filter on the Ford C-Max, you need to completely detach the panel located on the left side of the front passenger footwell: here…
Where is the Cabin Air Filter Located on a Ford C Max?
Where is the Cabin Air Filter Located on a Ford C Max?
Ford C Max (2003-2010 / MK 1) The cabin air filter on a 2010 Ford C Max is located inside the vehicle's cabin. Specifically, the filter is on the left side, under the steering whe…
How to Replace the Cabin Filter in a Ford C-Max?
Ford C Max (2010-2019 / MK 2) Replacing the cabin filter in a Ford C-Max is a very simple and quick operation; let's see how to do it in this tutorial. You can proceed either by r…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos