Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Diesel Filter on Ford C-Max

Model: Ford C Max MK 1 - Years 2003-2010
Part: Diesel fuel filter

Let’s look at replacing the diesel filter on the Ford C-Max with the necessary components. Lift the front bonnet of the car to access the diesel filter; locate the diesel filter. Use a large screwdriver to unscrew the screws securing the diesel filter (a socket wrench can also be used). The screws are located near the container where the diesel filter is situated. Once the filter is removed, take it out of the vehicle (replace it with a new filter). Install the filter into the attached container (connect the hoses and cables) and tighten the appropriate pins. Test the car's starting after installing the new filter.

Updated on 30 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Diesel Filter on Ford C-Max
Replacing Diesel Filter on Ford C-Max
Ford C Max (2010-2019 / MK 2) In this video, learn how to remove the diesel filter from a Ford C-Max; it will also demonstrate how to perform routine maintenance servicing. To rep…
How do you replace the cabin filter of the Ford C-Max?
How do you replace the cabin filter of the Ford C-Max?
Ford C Max (2010-2019 / MK 2) In order to replace the cabin filter of the Ford C-Max, you need to completely remove the panel located on the left side of the front passenger footw…
How to Replace the Cabin Filter in a Ford C-Max?
Ford C Max (2010-2019 / MK 2) Replacing the cabin filter in a Ford C-Max is a very simple and quick operation; let's see how to do it in this tutorial. You can proceed either by r…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos