Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : Ford Focus 1.6 TDCi diesel filter replacement

Ford Focus - Video tutorial

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Diesel filter
Operation: Ford Focus 1.6 TDCi diesel filter replacement

Today we will see how to remove and replace the diesel filter of a Ford Focus second series. First of all, we open the bonnet of our car and with a socket wrench we remove the screws of the engine protection cover: then we unscrew the bolts of our diesel filter, always with a socket wrench with extension. At this point we disconnect the various diesel pipes, pressing on the clamps, loosening them; then we remove the old filter, pulling it upwards. We mount the new one (possibly the original one) and reconnect the pipes, finally screwing the screws.


Posted on 29 December 2023 by ScegliAuto

    Frequently Asked Questions

    • Focus 2004-2011 - How much does it cost to replace the diesel filter on the Ford Focus 1.6 tdci? Read Answer
    • Focus 2004-2011 - How often should the Ford Focus diesel filter be changed? Read Answer
    • Focus 2004-2011 - How much does the Ford Focus fuel filter cost? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos