Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Diesel Filter in a Ford Kuga

Model: Ford Kuga C520, MK 2 - Years 2012-2019
Part: Diesel fuel filter

Before you begin, open the bonnet of your Ford Kuga. Start by unscrewing and removing the bolts that secure the diesel filter cover, then remove the cover itself. Next, unscrew the four upper screws that secure the filter cap. Once this step is complete, lift the filter cover to access the diesel filter itself. Proceed to extract the filter, and you will have finished the disassembly. To install the new filter and close everything up, simply repeat these instructions in reverse, and you will have completed the replacement.

Updated on 2 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Diesel Filter on a Ford Kuga
How to Replace the Diesel Filter on a Ford Kuga
Ford Kuga (2012-2019 / C520, MK 2) Learn how to remove the diesel filter on a Ford Kuga. Lift the car on a column lift (jack), locate the diesel filter after removing the soundproofing…
How to replace the diesel filter on the Ford Kuga?
How to replace the diesel filter on the Ford Kuga?
Ford Kuga (2012-2019 / C520, MK 2) To replace the diesel filter on the Ford Kuga, open the bonnet to locate the filter in the engine compartment: it will be on the side of the compartm…
How to Replace the Fuel Filter in a Ford Kuga?
How to Replace the Fuel Filter in a Ford Kuga?
Ford Kuga (2012-2019 / C520, MK 2) You can replace the fuel filter in a Ford Kuga by opening the bonnet to access the components inside the engine bay. The upper engine cover panel can…

    Frequently Asked Questions

    • Kuga 2012-2019 - How to replace the fuel filter on the Ford Kuga 2.0? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos