Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Diesel Filter Replacement on Ford Focus

Model: Ford Focus MK 2, Focus 2 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Diesel fuel filter

See other generations:
Video tutorial

Lift the bonnet and insert the support rod. Remove the plastic engine cover by hand. Unscrew the bolts and the metal bracket located above the diesel filter.

Disconnect the connector. Spray some cleaning spray in the work area.

Using a flat screwdriver, detach the flexible hoses from the diesel filter. At this point, you can easily slide out the filter.

For reassembly, proceed in reverse: insert it back in place, connect the flexible hoses, and attach the fixing bracket by screwing in the bolts. Good luck!


Updated on 2 April 2026 by ScegliAuto


Related tutorials

Replacing the Diesel Filter on a Ford Focus 1.6 TDCi
Replacing the Diesel Filter on a Ford Focus 1.6 TDCi
Ford Focus (2004-2011 / MK 2, Focus 2) Today, you will learn how to remove and replace the diesel filter on a second-generation Ford Focus. First, open the bonnet of your car and use a soc…
How to Replace the Fuel Filter on a Ford Focus?
Ford Focus (2004-2011 / MK 2, Focus 2) Open the bonnet to access the components in the engine bay. Remove the panel on top of the engine block to reach the underlying fuel filter. Disconne…
Replacing the Diesel Filter on a Ford Focus
Replacing the Diesel Filter on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Do you want to replace the diesel filter on your Ford Focus? Let’s look at removing the filter. Locate the diesel filter as shown in the video. Disco…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos