Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Front Headlight Bulb on Ford Focus MK1

Model: Ford Focus MK 1 - Years 1998-2004
Part: Headlight bulb

In today's video, follow the instructions to remove and replace the front headlight bulb on a first-generation Ford Focus. First, open the bonnet of your car and remove the bulb protection cap. Then, disconnect the electrical connector of the dipped beam bulb and unclip the metal spring to completely remove the bulb, as shown in the video. Now, replace it with a new one of the correct type (in this case, H7), and reassemble everything; the replacement of the other bulbs will be illustrated later!

Updated on 2 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Front Headlamp Bulb on a Ford Focus MK2
Replacing the Front Headlamp Bulb on a Ford Focus MK2
Ford Focus (2004-2011 / MK 2, Focus 2) In this video tutorial, follow the instructions to replace the front headlamp bulb on a Ford Focus MK2. First, open and lift the bonnet of your car a…
How to Remove the Front Bumper from a Ford Focus
How to Remove the Front Bumper from a Ford Focus
Ford Focus (1998-2004 / MK 1) Before you start, open the bonnet of your Ford Focus. Begin by unscrewing and removing the screws and bolts located around the perimeter of the bumpe…
What is the Security Code for the Ford Focus Radio
What is the Security Code for the Ford Focus Radio
Ford Focus (1998-2004 / MK 1) If you have replaced the radio in your Ford Focus or simply reset it to resolve serious operational errors, you will likely be prompted to enter the …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos