Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the High-Level Brake Light on Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part:

Open the boot lid to notice the two holes located at the back of the housing for the high-level brake light. Inside these two holes are two clips that need to be released. To do this, use a flat-head screwdriver and lever the clip outward until you hear a "click" indicating it has been removed from its seat. Once done, you can close the boot lid and extract the housing of the brake light, which will still be connected via the connector. Remove the old bulb and insert the new one.

Updated on 3 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Disable Start&Stop in the Ford Fiesta?
How to Disable Start&Stop in the Ford Fiesta?
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) In this short video, see how to disable the Start&Stop system in the Ford Fiesta. Start&Stop is the system that allows the automatic shutdown of the …
Replacement of the third brake light on a Ford Fiesta
Replacement of the third brake light on a Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) In this tutorial today, we will see how to replace the third brake lights of a Ford Fiesta, fifth generation model produced from 2002 to 2005. Let's …
Removing the Third Brake Light on Ford Fiesta
Removing the Third Brake Light on Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) In today's video, you'll learn how to remove the third brake light on a Ford Fiesta. The removal process is very simple: first, open the boot lid and…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos