Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Pump Solenoid on a Ford Transit

Model: Ford Transit MK 7 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Fuel pump

See other generations:
Video tutorial

Before starting, lift your Ford Transit to easily access the solenoid. Begin by positioning yourself under the van to reach the solenoid, located near the fuel pump.

Disconnect the relevant electrical connector. Next, undo the two bolts securing the solenoid.

Once the securing bolts are removed, the solenoid will be free, allowing you to take it out, completing the removal. To fit the new solenoid, simply reverse these steps, and the replacement will be complete.


Updated on 3 April 2026 by ScegliAuto


Related tutorials

How to Remove the Injection Pump on the Ford Transit MK6 - MK7
How to Remove the Injection Pump on the Ford Transit MK6 - MK7
Ford Transit (2000-2006 / MK 6) This guide outlines the main steps to remove and replace the diesel injection pump on the Ford Transit MK6 and MK7. First, open the bonnet and begin …
Replacing the Diesel Filter on a Ford Transit
Replacing the Diesel Filter on a Ford Transit
Ford Transit (2014-2024 / MK 8) Replacing the diesel filter on a Ford Transit? Remove the filter and replace it with a new one. Open the front bonnet of the vehicle, locate the dies…
Replacement of the diesel filter of the Ford Transit 2.2 TDCi
Replacement of the diesel filter of the Ford Transit 2.2 TDCi
Ford Transit (2014-2024 / MK 8) Today we will discover the steps that will allow us to disassemble and replace the diesel fuel filter cartridge of the Ford Transit 2.2 TDCi. First o…

    Frequently Asked Questions

    • Transit 2006-2014 - Where is the Ford Transit inertia switch located? Read answer

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos