Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Diesel Filter on a Ford Transit

Model: Ford Transit MK 8 - Years 2014-2024
Part: Diesel fuel filter

Replacing the diesel filter on a Ford Transit? Remove the filter and replace it with a new one. Open the front bonnet of the vehicle, locate the diesel filter as shown in the video. Once located, remove the diesel filter from its housing (place a container to catch the diesel that spills out). Fit the new filter to the attached diesel filter housing: secure the filter properly upwards where the circulation pipes are. Close the front bonnet after installation. Start the vehicle with the appropriate key and test its operation.

Updated on 20 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the diesel filter on a Ford Transit?
How to replace the diesel filter on a Ford Transit?
Ford Transit (2006-2014 / MK 7) To replace the diesel filter on a Ford Transit, open the bonnet to access the components inside: you will need to remove the air filter box so that a…
Replacing the Diesel Filter on Ford Transit 2.4 DuraTorq
Replacing the Diesel Filter on Ford Transit 2.4 DuraTorq
Ford Transit (2000-2006 / MK 6) In this video tutorial, see how to remove and replace the diesel filter on a Ford Transit 2.4 DuraTorq in simple and quick steps. First, open and lif…
Removing the Diesel Filter on a Ford Transit
Removing the Diesel Filter on a Ford Transit
Ford Transit (2006-2014 / MK 7) Is the diesel filter of a Ford Transit due for a change? Here’s how to remove it. Lift the vehicle on a column lift, locate the diesel filter as show…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos