Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fitting a Window Deflector

Model: Ford C Max MK 2 - Years 2010-2019
Part: Accessory kit

Fitting a small deflector to the window makes driving more comfortable by allowing better air circulation and avoiding turbulence and annoying noise. This accessory is particularly useful in summer to avoid using the air conditioning or for smokers. The application of this useful accessory is very simple and accessible to everyone. After obtaining the kit, lower the window, remove the protective film from the adhesive, and insert the deflector into the rubber of the door seal. If positioned correctly, the window should close smoothly.

Updated on 6 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Installation of Parking Sensors
Installation of Parking Sensors
Ford C Max (2003-2010 / MK 1) Apply a strip of masking tape on the rear bumper where the parking sensors will be installed: it is recommended to use the unpainted lower plastic st…
How to Replace the Injectors on a Ford C-Max
How to Replace the Injectors on a Ford C-Max
Ford C Max (2010-2019 / MK 2) To replace the injectors on a Ford C-Max, open the bonnet and remove the plastic cover from the top of the engine bay. This will allow access to the …
Installing Dynamic Indicators on a Ford C-Max
Installing Dynamic Indicators on a Ford C-Max
Ford C Max (2010-2019 / MK 2) In this video, see how to install dynamic indicators on the side mirrors of a Ford C-Max, replacing the traditional direction indicators. Using the a…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos