Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Gear Knob on a Ford Transit

Model: Ford Transit MK 7 - Years 2006-2014
Part: Shift knob

Want to remove the gear knob from the Ford Transit? Here’s how to take off the gear knob. Grip the knob and turn it to the left until it comes off the gear stick (unscrew the thread). Use a plastic lever to disconnect the leather gaiter frame (if replacing). Secure the new leather gaiter with clips (if removed), then take the new knob and push it onto the stick in the centre console until it is tight. Test the movement of the stick in the centre console to ensure the knob is correctly fitted. Check the proper fastening of the plastics on the Ford gear stick.

Updated on 5 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replace the Gear Gaiter on Ford Transit
Replace the Gear Gaiter on Ford Transit
Ford Transit (2006-2014 / MK 7) Learn how to remove the gear gaiter on a Ford Transit. Detach the gaiter frame from the plastic covering on the centre tunnel, unscrew the knob until…
How to disassemble the flywheel and transmission of the Ford Transit
How to disassemble the flywheel and transmission of the Ford Transit
Ford Transit (2014-2024 / MK 8) In this guide, we will see the main instructions that will allow us to disassemble and replace the steering wheel and remove the transmission of the …
How to Remove the Gearbox from a Ford Transit?
How to Remove the Gearbox from a Ford Transit?
Ford Transit (2006-2014 / MK 7) To remove the gearbox from a Ford Transit, you need to lift the vehicle to gain access to the components underneath the engine bay. Here, you will lo…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos