Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Door Panel on a Ford Focus MK4

Model: Ford Focus MK 4 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Door trim panel

See other generations:
Video tutorial

In this video, follow the instructions to remove the front door panel on a Ford Focus MK4, fourth generation. First, open the front door and remove all the plastic covers using a very thin plastic lever, as shown in the video; then use a key or a Torx screwdriver to unscrew all the screws found underneath.

At this point, you can start to detach the door panel by finally removing the opening handle cable and the electrical connector of the window switch!


Updated on 5 April 2026 by ScegliAuto


Related tutorials

Removing the Door Panel on a Ford Focus
Removing the Door Panel on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) This guide covers the removal of the door panel on a Ford Focus to access the speaker. Remove the plastic trims to access the securing screws. Take o…
Removing the Right Door Panel on a Ford Focus
Removing the Right Door Panel on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Carry out the removal of the front right door panel on a Ford Focus. Disconnect the battery terminals located in the engine bay, then using a screwdr…
How to Remove the Trim Panel of the Rear Door on the Ford Focus?
How to Remove the Trim Panel of the Rear Door on the Ford Focus?
Ford Focus (2011-2018 / MK 3) By carefully following the tutorial provided, you can see how the protagonist performs a complete job regarding the assembly of the rear door of the …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos