Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Headlamp and Replace the Bulbs in a Ford Ka

Model: Ford Ka MK 1 - Years: 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Headlight

See other generations:
Video tutorial

This video teaches you how to remove the front headlamp and replace the bulbs in a Ford Ka. First, to access the headlamp, unscrew the screws securing the plastic cover above the wheel and remove it. Next, unscrew the screws securing the plastic strip between the two front headlamps.

At this point, you can pull out the headlamp, disconnect the bulb connectors, and open the plastic cover plate.

Once done, you can unscrew the bulbs to be replaced and insert new ones. After completing this operation, reassemble everything and you're done!


Updated on 6 April 2026 by ScegliAuto


Related tutorials

How to Remove a Front Headlamp and Replace the Bulbs on a Ford Ka
Ford Ka (2008-2016 / MK 2) Here’s how to remove a front headlamp and replace the bulbs on a Ford Ka: open the front bonnet by pulling the lever located at the bottom right of t…
How to Remove the Front Headlight on a Ford Ka
How to Remove the Front Headlight on a Ford Ka
Ford Ka (1996-2008 / MK 1) Before you start, open the front bonnet of your Ford Ka. Begin by unclipping and slightly moving the front wing near the headlight. Next, unscrew and…
How to Change the Front Headlamp Bulbs on a Ford Ka
Ford Ka (2008-2016 / MK 2) How do you change the front headlamp bulbs on a Ford Ka? Open the front bonnet by pulling the lever located at the bottom right of the dashboard, and…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos