Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove a Front Headlamp and Replace the Bulbs on a Ford Ka

Model: Ford Ka MK 2 - Years 2008-2016
Part: Headlight

Here’s how to remove a front headlamp and replace the bulbs on a Ford Ka: open the front bonnet by pulling the lever located at the bottom right of the dashboard, and secure it with the prop rod. Unscrew the securing pins of the headlamp (located at the top of the headlamp) and remove them. At this point, you will find the bulbs with metal clips; pull the bulb holders out of the headlamp and extract the damaged bulbs using a screwdriver. Install the new bulbs (always of the correct type and size) and insert the bulb holder into the headlamp housing. Reassemble all previously removed parts.

Updated on 9 March 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Change the Front Headlamp Bulbs on a Ford Ka
Ford Ka (2008-2016 / MK 2) How do you change the front headlamp bulbs on a Ford Ka? Open the front bonnet by pulling the lever located at the bottom right of the dashboard, and…
How to Remove the Front Headlight on a Ford Ka
How to Remove the Front Headlight on a Ford Ka
Ford Ka (1996-2008 / MK 1) Before you start, open the front bonnet of your Ford Ka. Begin by unclipping and slightly moving the front wing near the headlight. Next, unscrew and…
How to Remove the Front Headlamp and Replace the Bulbs in a Ford Ka
How to Remove the Front Headlamp and Replace the Bulbs in a Ford Ka
Ford Ka (1996-2008 / MK 1) This video teaches you how to remove the front headlamp and replace the bulbs in a Ford Ka. First, to access the headlamp, unscrew the screws securin…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos