Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlamp Bulb on a Ford Kuga

Model: Ford Kuga C394, MK 1 - Years 2008-2012
Part: Headlight bulb

Before you begin, open the front bonnet of your Ford Kuga. Start by unscrewing and removing the top screw that secures the headlamp. Next, unclip the cover located beneath the headlamp. This will expose the clips that secure the lower part, which you need to unclip to free the headlamp. Proceed to unclip and remove it from its housing, then disconnect the rear connectors. At this point, remove the cover of the blown bulb, then unclip the bulb from its housing and disconnect it from the corresponding connector, completing the disassembly. To fit the new bulb, simply repeat these steps in reverse, and the replacement will be complete.

Updated on 6 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the headlight bulb of the Ford Kuga
How to replace the headlight bulb of the Ford Kuga
Ford Kuga (2012-2019 / C520, MK 2) Replacing the right and left front headlight bulbs of the Ford Kuga is a simple and quick operation because thanks to the ample space of the front ho…
How to Replace the Front Headlight Bulb of the Ford Kuga?
How to Replace the Front Headlight Bulb of the Ford Kuga?
Ford Kuga (2008-2012 / C394, MK 1) To replace the front headlight bulb of the Ford Kuga, open the bonnet to access the components at the rear of the headlight. Here, you will find the …
How to replace the headlight bulb on a Ford Kuga
How to replace the headlight bulb on a Ford Kuga
Ford Kuga (2008-2012 / C394, MK 1) Replacing the front headlight bulb of the 2009 Ford Kuga is a very simple operation that can be done independently. The first step is to park the car…

    Frequently Asked Questions

    • Kuga 2012-2019 - How to replace the sidelight bulbs in Ford Kuga? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos