Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reset Tyre Pressure Warning Light on Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Tire pressure warning light

Using the button and the ignition key, turn on the dashboard without starting the engine (this is not necessary). With the buttons below the onboard computer, access the tyre warning alarm indicated by the vehicle: press the "menu" button, scroll with the arrows to "vehicle settings" and press "ok". Enter the section that monitors tyre pressure and, once here, hold down the "ok" button until the reset is complete. It is advisable to thoroughly check the various tyres (for any leaks) and their pressure with a suitable gauge before performing this procedure.

Updated on 6 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting the Tyre Pressure Light on a Ford Fiesta
Resetting the Tyre Pressure Light on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) This guide briefly outlines the steps needed to reset the tyre pressure light on a Ford Fiesta; before performing the reset, ensure all four tyres ar…
Resetting Tyre Pressure on Ford Fiesta
Resetting Tyre Pressure on Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) What to do when the tyre warning light appears? Let's reset the tyre warning light on the Ford Fiesta. Turn on the ignition with the appropriate key …
How to Reset the Tyre Pressure Light on the Ford Fiesta?
How to Reset the Tyre Pressure Light on the Ford Fiesta?
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) To reset the tyre pressure light on the Ford Fiesta, turn on the ignition by rotating the key in the ignition switch: once the dashboard is on, selec…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos