Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Rear Light and Replacing Bulbs on Ford Fiesta MK5

Model: Ford Fiesta Fiesta 5, MK 5, MK V - Years 2002-2008
Part: Tail light

Open the boot lid and unscrew the T25 torx screws that secure the affected light cluster. If you wish, you can detach the boot cover to create more space, then pull the light cluster out of its housing. To replace any burnt-out bulb in this light, simply unscrew the connector slightly from behind and pull it out of the light along with the bulb. Remove the bulb from the connector and insert the new one, then you're done! Refit the light cluster by screwing in the two torx screws that secure it to the body and check that it works correctly.

Updated on 7 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Rear Light on a Ford Fiesta
Removing the Rear Light on a Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) Let's see how to remove the rear light on a Ford Fiesta. Lift the tailgate to access the securing screws located at the sides of the light. Unscrew t…
Replacing the Rear Headlamp Bulb on a Ford Fiesta
Replacing the Rear Headlamp Bulb on a Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) In this video tutorial, follow the instructions to remove and replace the rear headlamp bulb on a second-generation Ford Fiesta. First, open the boot…
Replace Indicator Bulbs on Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) Replacing the indicator bulbs mounted in the front headlamp of a Ford Fiesta. Here’s how to do it. Open the front bonnet by pulling the lever located…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos