Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Number Plate Light on Ford Mondeo

Model: Ford Mondeo / Fusion MK 3 - Years 2007-2014
Part: License plate light

Are the number plate bulbs not working correctly? Here’s how to replace them. Remove the number plate light unit located in the tailgate to access the bulbs: lift the tailgate to reach the lights. Once the light unit is removed, pull out the bulb holder by hand, then disconnect the bulb from it. Fit the new/LED bulb (same size and voltage), insert it into the bulb holder, and refit the light unit into the tailgate, pressing until the clips lock automatically. Test the operation of the number plate lights.

Updated on 9 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Timing Belt of the Ford Mondeo?
How to Replace the Timing Belt of the Ford Mondeo?
Ford Mondeo / Fusion (2007-2014 / MK 3) To replace the timing belt of the Ford Mondeo, open the bonnet to access the engine bay and remove the cover from its upper and side parts. The pulle…
How to Replace the Remote Battery on a Ford Mondeo?
How to Replace the Remote Battery on a Ford Mondeo?
Ford Mondeo / Fusion (2014-2021 / MK 4) To replace the battery in the remote for a Ford Mondeo, slide the key out from the top of the device to leverage it open. Once this is done, open the…
How to Replace the Handbrake Cable on a Ford Mondeo?
How to Replace the Handbrake Cable on a Ford Mondeo?
Ford Mondeo / Fusion (2000-2007 / MK 2) To replace the handbrake cable on a Ford Mondeo, lift the car with a jack or ramp to access the bolts securing the right rear wheel. Once this wheel …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos