Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Bumper on a Ford Fiesta ST

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Rear bumper

Today, you will learn how to remove the rear bumper on a Ford Fiesta ST, from 2008 to 2017, by following the instructions below. First, lift the vehicle at the rear and remove the wheels; then remove all the fastening clips found on the wheel arches, also unscrewing the screws with an 8 mm spanner. Next, open the boot to unscrew the screws located above the bumper using a T20 Torx spanner; finally, remove the lower clips of the bumper to take it off. Follow the video to the end for reassembly!

Updated on 11 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Bumper of a Ford Fiesta
How to Remove the Rear Bumper of a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Before you can start, open the boot of your Ford Fiesta. Begin by unscrewing and removing the fastening bolts located in the rear wheel arches. Next,…
Fitting Rear Bumper on Ford Fiesta
Fitting Rear Bumper on Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) In this tutorial video, you will learn how to fit the rear bumper on a Ford Fiesta. First, position the bumper correctly and slot it in place from th…
Removal of the rear bumper of the Ford Fiesta
Removal of the rear bumper of the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Today we will see the instructions that will allow us to disassemble and replace the rear bumper of the Ford Fiesta. First of all, we open the rear h…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos