Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Seatbelt of a Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Checks and maintenance

Before you begin, recline and move the front seat of your Ford Fiesta fully forward, then sit in the back seat. Start by unscrewing and removing the bolt that secures the lower section of the seatbelt. Next, repeat this step for the upper section. Once done, unclip and remove the cover of the lower pillar section to access the seatbelt retractor. Proceed by unscrewing the relevant bolts and fixing clips, then disconnect the electrical connector, and you will have completed the removal.

Updated on 13 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Seatbelt on Ford Fiesta (2008-2017)
How to Remove the Front Seatbelt on Ford Fiesta (2008-2017)
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) In this video, you will see the main instructions that will allow you to remove the front seatbelts on a Ford Fiesta (2008-2017). First, open the bon…
How to Replace the Seat Belt on the Ford Fiesta
How to Replace the Seat Belt on the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) In this brief guide, follow the instructions on how to remove and replace the seat belt on the Ford Fiesta. First, open the front door and begin remo…
Guide to Replacing the Timing Belt of the Ford Fiesta ST
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Below are the steps to remove and replace the timing belt of the Ford Fiesta ST; the replacement procedure is complex and requires patience. First, o…

    Frequently Asked Questions

    • Fiesta 2008-2017 - What problems does the Ford Fiesta 1.4 TDCi have when accelerating? Read answer
    • Fiesta 2008-2017 - What does MCA mean on a Ford Fiesta? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos