Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Position Lights on Ford Ecosport

Model: Ford Ecosport BK, MK 1 - Years 2012-2023
Part: Headlight bulb

To replace any bulb on a Ford Ecosport, as with many car models, you must first remove the headlamp along with its entire assembly. To do this, a very simple operation, open the bonnet and secure it with the support rod. First, remove the trim using a screwdriver, then to remove the headlamp housing, simply unscrew the two Torx screws that hold it in place. While removing the headlamp, disconnect the cables. Now, with the headlamp in hand, detached from the car, unscrew the cover related to the bulb in question, remove it, and insert the new one.

Updated on 14 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Open the Bonnet on Ford Ecosport
How to Open the Bonnet on Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) Opening the engine bonnet on a Ford Ecosport is a very simple operation. Like many other car models, the Ford Ecosport has a lever inside the cabin, …
How to Open the Boot Lid of a Ford Ecosport
How to Open the Boot Lid of a Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) Before you start, exit the cabin of your Ford Ecosport and head to the rear boot lid. Begin by grasping and pulling the handle located inside the rig…
How to Replace the Key Battery on a Ford EcoSport
How to Replace the Key Battery on a Ford EcoSport
Ford Ecosport (2012-2023 / BK, MK 1) In this video, see how to replace the battery in a Ford EcoSport key. First, get a small flathead screwdriver. Use the screwdriver to pry off the cov…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos