Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the stop lights of the Ford Ecosport

Model: Ford Ecosport BK, MK 1 - Years 2012-2023
Part: Tail light

In this video, we see how it is possible to replace the stop lights on a Ford Ecosport: we will need a Torx screwdriver and a flathead screwdriver. We open the rear door: we will see on the inside of the trunk two plastic pins that can be unscrewed with our fingers. Unscrew the four screws and remove the cover. We find the bulbs and can change them, always remembering not to touch the new ones with bare hands. Close the cover and put the light back in place, closing the two plastic pins; for the other side, the process is similar, but there are also two screws to be removed on the external plate of the trunk door: then we can proceed in the same way, even for reassembly.

Posted on 18 February 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Brake Light Bulbs on the Ford EcoSport?
How to Replace the Brake Light Bulbs on the Ford EcoSport?
Ford Ecosport (2012-2023 / BK, MK 1) In this tutorial, you will see how to replace the brake light bulbs on the Ford EcoSport, a very simple and quick operation. Before proceeding, ensur…
How to Permanently Disable the Start&Stop on the Ford Ecosport?
How to Permanently Disable the Start&Stop on the Ford Ecosport?
Ford Ecosport (2012-2023 / BK, MK 1) To permanently disable the Start&Stop feature on the Ford Ecosport, you need to install a module that automatically remembers the last position of th…
How do you deactivate the Start&Stop feature of the Ford Ecosport?
How do you deactivate the Start&Stop feature of the Ford Ecosport?
Ford Ecosport (2012-2023 / BK, MK 1) To deactivate the Start&Stop of the Ford Ecosport, you need to insert the ignition key into the ignition switch: once the dashboard is turned on, you…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos