Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the engine oil of a Ford Ka

Model: Ford Ka MK 2 - Years 2008-2016
Part: Engine oil

Before we can begin, we will have to open the front hood of our Ford Ka. So let's start by unscrewing and removing the engine oil top cap. Once this is done, we will have to lift the front of our car, and then unscrew and remove the lower drain nut. By doing so, we will drain all the engine oil. When the engine oil has completely flowed out, we will have to screw the lower nut back on, and then lower the front. At this point, we will have to insert the new oil through the upper hole, and then screw the relative cap back on. When we have completed this step, we will have successfully completed the replacement.

Posted on 26 May 2021 by ScegliAuto

Video tutorial

Related tutorials

How to Top Up the Engine Oil Reservoir on a Ford Ka
How to Top Up the Engine Oil Reservoir on a Ford Ka
Ford Ka (1996-2008 / MK 1) Learn how to top up the engine oil reservoir on a Ford Ka after changing the oil. Unscrew the oil sump cap, let the oil drain out, and then replace t…
Resetting the service light on a Ford Ka.
Resetting the service light on a Ford Ka.
Ford Ka (2016-2019 / MK 3) After changing the engine oil in our vehicle, it is also necessary to reset the corresponding indicator, namely the service indicator. In today's vid…
Engine Oil and Oil Filter Replacement
Engine Oil and Oil Filter Replacement
Ford Ka (1996-2008 / MK 1) Lift the vehicle on suitable car ramps; if necessary, add a specific internal engine cleaning additive through the oil filler cap before draining the…

Other guides you may be interested in

How to Remove the Headlight Bulbs on a Toyota Rav4

Let's see how to remove the headlight bulbs on a Toyota Rav4. Open the bonnet by pulling the lever located at the bottom right of the dashboard and secure it. Locate the inspection cap (if present) on the headlight and remove it (located at the rear of the headlight). At this point, you will find the bulbs with metal clips; pull the bulb holders out of the headlight and extract the damaged bulb using a screwdriver and pliers. Fit the new bulb (ensuring it is the correct type and size), insert the bulb holder back into the headlight housing, and close the headlight with the inspection cap. Test the lights to ensure they are functioning correctly.

Watch the video!


by ScegliAuto

More videos