Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Top Up the Engine Oil Reservoir on a Ford Ka

Model: Ford Ka MK 1 - Years 1996-2008
Part: Checks and maintenance

Learn how to top up the engine oil reservoir on a Ford Ka after changing the oil. Unscrew the oil sump cap, let the oil drain out, and then replace the cap. Pull the plastic lever located at the bottom left of the dashboard, lift the front bonnet, and secure it with the metal prop. Next, locate the oil filler cap (remove it). Use a funnel to add new oil and replace the filler cap. Close the engine bonnet after maintenance. Test the proper functioning of the maintenance performed by starting the engine.

Updated on 13 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Engine Oil Warning Light on the Ford Ka
How to Reset the Engine Oil Warning Light on the Ford Ka
Ford Ka (2016-2019 / MK 3) This guide shows how to reset the oil warning light that appears on the instrument cluster of the Ford Ka. First, turn on the ignition only; then, us…
How to Replace the Heater Matrix of the Ford Ka
How to Replace the Heater Matrix of the Ford Ka
Ford Ka (1996-2008 / MK 1) The cabin heating system actually uses the engine coolant, which is passed through a specific valve into a small radiator located inside the cabin, a…
How to Change the Coil of a Ford Ka
How to Change the Coil of a Ford Ka
Ford Ka (1996-2008 / MK 1) Here’s how to remove the engine coil of a Ford Ka. Open the car door, pull up the engine compartment release lever located at the bottom left of the …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos