Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Engine Oil Warning Light on the Ford Ka

Model: Ford Ka MK 3 - Years 2016-2019
Part: Service warning light

This guide shows how to reset the oil warning light that appears on the instrument cluster of the Ford Ka. First, turn on the ignition only; then, using the button on the right lever, navigate to the oil health section. By holding down the button, the warning light will be reset. Wait for the success message, and then you can complete the procedure. At this point, you can turn off the ignition and turn it back on again to check that the procedure was successful. No tools are required for this reset operation.

Updated on 15 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Ford Ka
How to Reset the Service Light on a Ford Ka
Ford Ka (1996-2008 / MK 1) To reset the service light on a first-generation Ford Ka, completely switch off the engine and the instrument cluster. Locate the trip reset button, …
How to reset the tire pressure sensor on a Ford Ka?
How to reset the tire pressure sensor on a Ford Ka?
Ford Ka (2016-2019 / MK 3) To reset the tire pressure warning light on a Ford Ka, start by turning on the instrument panel without starting the engine. Use the buttons on the d…
How to Reset the Service Light on a Ford Ka
How to Reset the Service Light on a Ford Ka
Ford Ka (2008-2016 / MK 2) How to reset the service light on a Ford Ka. This is a very simple operation; enter the vehicle, turn on the ignition, and check the illuminated ligh…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos